High Speed, Three-Side-Seal with Stand-Up Pouch Automatic Pouch Bag Machine
GSD-600S
| 1. Control Unit |
11. Tension Control Unit |
21. Motor |
| 2. Optional |
12. Front Rubber Rollers |
22. Middle Cutter |
| 3. Indexing Conveyor |
13. Slitter Edge Unit |
23. Unwinding Roller |
| 4. Cutter Unit |
14. Longitudinal Cooling Plate |
24. Encoder |
| 5. After Drawing Rubber Rollers |
15. Adjusting Nut for Pressure |
25. Web |
| 6. Slitter |
16. Longitudinal Heat Sealer |
26. Tension Swing Roller |
| 7. Punch Device |
17. Damp Plate |
27. EPC |
| 8. Mark Sensor Unit |
18. Cutter Edge Roll |
28. Front Servomotor |
| 9. Cross Cooling Plate |
19. Dancer Roller |
29. Motor for Actuation |
| 10. Cross Heat Sealer |
20. Adjusting for Edge and Design |
30. After Servomotor |
Three-Side-Seal Pouch Bag Machine
| Bottom Seal (4-line bottom seal case illustrated) |
| L1 (Pouch Length): |
Strike 300mm max. |
| W1 (Pouch Width): |
75mm to 600mm |
| S1 (Seal Width): |
60mm max. |
| S2 (Seal Width): |
25mm max. |
| Bottom Seal (4-line side seal case illustrated) |
| W2 (Pouch Width): |
Strike 300mm max. |
| L2 (Pouch Length): |
75mm to 600mm |
| S3 (Seal Width): |
25mm max. |
| S4 (Seal Width): |
30mm max. |
| General: |
| Film: |
Laminated films of all kinds. |
| Roll Size: |
Max. Width: 1200mm
Max. Diameter: 600mm
3-inch paper core. |
| Roll Film Unwinding Unit: |
Horizontal shaft, V-plate system, and definitive tension control system with power brake equipment. |
| Control System: |
Numerical control system. |
| Film Feed Mechanism: |
Dual AC servo motor drive system, computerized equipment settings, and print mark detection by color mark sensor. |
| Heatsealer Vertical Movement Mechanism: |
Single AC asynchronous motor drive system. |
| Swaling Width: |
Cross Seal Width: 60mm max.
Longitudinal Sealing Width: 50mm max.
Wide heat sealer required for sealing widths exceeding 50mm (60mm max.). |
| Function Data Setting: |
Sealing temperature, pouch making speed, etc. |
| Bag Making Capacity: |
Max. Cycles: 160CPM
Max. Film Speed: 42m/min
Cycles and film speed are calculated separately and are related. |
| Power Required: |
Feed AC Servo Motor: |
1 × 1.0kW + 1 × 1.5kW = 2.5kW |
| Heat Sealer AC Asynchronous Motor: |
1 × 3.0 = 3.0kW |
| Roll Film Unwinding Motor: |
1 × 0.4 = 0.4kW |
| Longitudinal Heat Sealer: |
5 × 2.0kW × 2 = 20.0kW |
| Cross Heat Sealer: |
3 × 2.0kW × 2 = 12.0kW |
| Other: |
3kW |
| Total: |
41kW |
| Area for Installation (mm): |
2000 × 7930 |
| Weight: |
5000kg |
| Optional Equipment: |
Standing pouch unit, various punch equipment, 2-stage racking unit, and one servo for heat sealer vertical drive. |
| Bag making capacity depends on film material and thickness. Due to equipment improvement, the abovementioned figures and appearances may be changed without notice. The optional equipment mentioned above are sold separately and are not included as standard equipment. Options in addition to those mentioned above can be designed and manufactured to suit customer needs. |
|
888-277-1176
PLASTIC PROCESSING EQUIPMENT