High Speed Three-Side-Seal Series Two Automatic Pouch Bag Machine with Stand-Up and Zipper Seal Unit

GSD-600SZL II

pouch-gsd600szlii

pouch-gsd600szlii-sc

1. Control Unit	18. Longitudinal Heat Sealer	35. EPC
2. Optional	19. Tension Control Unit	36. Triangular Plate System & Half Fold Device
3. Indexing Conveyor	20. Front Drawing Rubber Rollers	37. Web
4. Cutter Unit	21. Fixation For Zipper Moulding	38.
5. After Drawing Rubber Rollers	22. Zipper Cooling Plate	39. Dancer Roller
6. Slitter	23. Zipper Seal Unit	40. Subber Roller
7. Punch Device	24. Zipper Moulding	41. Small Set Square
8. Mark Sensor Unit	25. Mark Sensor Unit for Standing Punch	42. Lower Level Dancer Roller
9. Cross Cooling Plate	26. Pinch Roller	43. Adjusting Nut for Pressure
10. Cross Heat Sealer	27. Adjusting for Edge	44. Up Heat Sealer for Zipper
11. Zipper Point Heat Sealer	28. Top Level Dancer Roller	45. Down Heat Sealer for Zipper
12. Tension Control Unit	29. Box Gusset Device	46. Front Servomotor
13. Center Drawing Rubber Rollers	30. Pinch Roll	47. Center Servomotor
14. Slitter Edge Unit	31. Bottom Punch Unit	48. Motor for Actuation
15. Mark Sensor Unit	32. Small Set Square	49. After Servomotor
16. Longitudinal Cooling Plate	33. Middle Cutter
17. Adjusting Nut for Pressure	34. Motor

Three-Side-Seal Pouch Bag Machine and Standing Pouch Machine
See GSD-600SZ model for three-side-seal pouch bag machine and standing pouch bag machine.
Standing Pouch with Zipper 2-line Pouch Bag Machine (1-line pouch bag machine is also possible）
W (Pouch Width):	60mm to 250mm
L (Pouch Length):	120mm to 270mm (2-line pouch bag machine) 275mm to 540mm (1-line pouch bag machine)
G （Bottom Gusset Depth):	20mm to 70mm
A （Bottom Punch Diameter [Standard]):	φ16mm
Standing Pouch with Zipper Pouch Bag Machine (1-line pouch bag machine)
W1 (Pouch Width):	60mm to 250mm
L1 (Pouch Length):	240mm to 540mm (2-line pouch bag machine)
G1 （Bottom Gusset Depth):	20mm to 70mm
A1 （Bottom Punch Diameter [Standard]):	φ16mm

General:
Film:	Laminated films of all kinds.
Standing Pouch with Zipper 2-line Pouch Bag Machine Roll Size:	Body Material: Max. Width: 1200mm Max. Diameter: 600mm 3-inch paper core. Bottom Material: Max. Width: 150mm Max. Diameter: 600mm Max. Weight: 35Kgf 3-inch paper core.
Three-side-seal Pouch Bag Machine Roll Size:	See GSD-600S model for roll film dimensions for three-side-seal pouch bag machine.
Roll Film Unwinding Unit:	Body Material: Horizontal shaft, V-plate system or triangular plate sytem, and definitive tension control system with power brake equipment. Bottom Material: Horizontal shaft, triangular plate system, and definitive tension control system with power brake equipment.
Control System:	Numerical control system.
Film Feed Mechanism:	Triple AC servo motor drive system, computerized equipment settings, and print mark detection by color mark sensor.
Heatsealer Vertical Movement Mechanism:	Single AC asynchronous motor drive system.
Pouch Making Date Function:	Sealing temperature, pouch making speed, etc.
Pouch Making Capacity:	Three-Side-Seal Pouch Bag Machine: Max. Cycles: 140CPM Max. Film Speed: 36m/min Standing Pouch Bag Machine: Max. Cycles: 120CPM Max. Film Speed: 25m/min Three-Side-Seal with Zipper Pouch Bag Machine: Max. Cycles: 70CPM Max. Film Speed: 25m/min Standing Pouch with Zipper Pouch Bag Machine: Max. Cycles: 70CPM Max. Film Speed: 25m/min Cycles and film speed are calculated separately and related.
Power Required:	Feed AC Servo Motor:	1 × 1.0kW + 2 × 1.5kW = 4.0kW
	Heat Sealer AC Asynchronous Motor:	1 × 3.0kW = 3.0kW
	Roll Film Unwinding Motor:	1 × 0.4kW = 0.4kW
	Longitudinal Heat Sealer:	3 × 2.0kW × 2 = 12.0kW
	Bottom Heat Sealer:	2 × 2kW × 2 = 8kW
	Cross Heat Sealer:	3 × 2.0kW × 2 = 12kW
	Zipper Heat Sealer:	2 × 1.5kW × 2 = 6.0kW
	Standing Pouch Unwinding Motor:	2 × 0.09kW = 0.18kW
	Other:	3kW
	Total:	49kW
Area for Installation (mm):	2545 × 13070
Weight:	7200kg
Optional Equipment:	Various punch equipment, 2-stage racking unit, and one servo for heat sealer vertical drive.
Bag making capacity depends on film material and thickness. Due to equipment improvement, the abovementioned figures and appearances may be changed without notice. The optional equipment mentioned above are sold separately and are not included as standard equipment. Options in addition to those mentioned above can be designed and manufactured to suit customer needs.

REQUEST A QUOTE