Three-Side-Seal Automatic Pouch Bag Machine
GSD-1200S
| 1. Control Unit |
11. Front Drawing Rubber Rollers |
21. Tension Swing Roller for Top Film |
| 2. Optional |
12. Slitter Edge Unit |
22. Top Web |
| 3. Indexing Conveyor |
13. Longitudinal Cooling Plate |
23. Lower Web |
| 4. Cutter Unit |
14. Adjusting Nut for Pressure |
24. Lower Level Dancer Roller |
| 5. After Drawing Rubber Rollers |
15. Longitudinal Heat Sealer |
25. Lower EPC Head |
| 6. Slitter |
16. Pinch Roll |
26. Lower Level Dancer Roller |
| 7. Mark Sensor Unit |
17. Adjusting Roller for Top Film |
27. Adjusting Roller for Lower Film |
| 8. Cross Cooling Plate |
18. EPC |
28. Front Servomotor |
| 9. Cross Heat Sealer |
19. Top Level Dancer Roller |
29. Motor for Actuation |
| 10. Tension Control Unit |
20. Top EPC Head |
30. After Servomotor |
| Bottom Seal (4-line bottom seal case illustrated) |
| L1 (Pouch Length): |
Strike 400mm max. |
| W1 (Pouch Width): |
100mm to 1200mm |
| S1 (Seal Width): |
60mm max. |
| S2 (Seal Width): |
25mm max. |
| Bottom Seal (4-line bottom seal case illustrated) |
| W2 (Pouch Width): |
Strike 400mm max. |
| L2 (Pouch Length): |
100mm to 1200mm |
| S3 (Seal Width): |
25mm max. |
| S4 (Seal Width): |
30mm max. |
| General: |
| Film: |
Laminated films of all kinds. |
| Roll Size: |
Max. Width: 1240mm
Max. Diameter: 600mm
3-inch paper core. |
| Roll Film Unwinding Unit: |
Horizontal shaft and definitve tension control system with power brake equipment. |
| Control System: |
Numerical control system. |
| Film Feed Mechanism: |
Dual AC servo motor drive system, computerized equipment settings, and print mark detection by color mark sensor. |
| Heatsealer Vertical Movement Mechanism: |
Single AC asynchronous motor drive system. |
| Heatsealer Vertical Movement Mechanism: |
Cross Seal Width: 70mm max.
Longitudinal Sealing Width: 50 max.
Wide heat sealer required for sealing widths exceeding 50mm (70mm max.). |
Function Data Setting:
|
Sealing temperature, pouch making speed, etc. |
| Bag Making Capacity: |
Max. Cycles: 120 CPM
Max. Film Speed: 36m/min
Cycles and film speed are calculated separately and related. |
| Power Required: |
Feed AC Servo Motor: |
2 × 1.0kW + 1 × 1.5kW = 3.5kW |
| Heat Sealer AC Asynchronous Motor: |
1 × 3.7kW = 3.7kW |
| Roll Film Unwinding Motor: |
2 × 0.75kW = 1.5kW |
| Longitudinal Heat Sealer: |
4 × 2.5kW × 2 = 20kW |
| Cross Heat Sealer: |
3 × 3.0kW × 2 = 18.0kW |
| Other: |
3kW |
| Total: |
50kW |
| Area for Installation (mm): |
2000 × 9500 |
| Weight: |
5000kg |
| Optional Equipment: |
Various punch equipment and one servo for heat sealer vertical drive. |
| Bag making capacity depends on film material and thickness. Due to equipment improvement, the abovementioned figures and appearances may be changed without notice. The optional equipment mentioned above are sold separately and are not included as standard equipment. Options in addition to those mentioned above can be designed and manufactured to suit customer needs. |
|
888-277-1176
PLASTIC PROCESSING EQUIPMENT