Three-Side-Seal with Standing Pouch Automatic Pouch Bag Machine (with Dual-Servo Drive System)

WSD-400SZ

pouch-wsd400sz

1. Control Unit	12. Tension Control Unit	23. Middle Cutter
2. Optional	13. Front Drawing Rubber Rollers	24. Unwinding Roller
3. Indexing Conveyor	14. Box Gusset Device, Slitter Edge Unit	25. Encoder
4. Cutter Unit	15. Adjusting Nut for Pressure	26. Web
5. After Drawing Rubber Rollers	16. Longitudinal Cooling Plate	27. Tension Swing Roller
6. Punch Device	17. Longitudinal Heat Sealer	28. EPC
7. Mark Sensor Unit	18. Forming Unit	29. Dancer Roller
8. Cross Cooling Plate	19. Center Board	30. Front Servomotor
9. Cross Heat Sealer	20. Adjusting Roller	31. Motor for Actuation
10. Foaming Cooling Plate	21. Adjusting for Edge and Design	32. After Servomotor
11. Foaming Heat Sealer	22. Motor

Three-Side-Seal Pouch Bag Machine

Bottom Seal (3-line bottom seal case illustrated)
L1 (Pouch Length):	Strike 300mm max.
W1 (Pouch Width):	75mm to 400mm
S1 (Seal Width):	60mm max.
S2 (Seal Width):	25mm max.
Bottom Seal (3-row side seal case illustrated)
W2 (Pouch Width):	Strike 300mm max.
L2 (Pouch Length):	50mm to 400mm
S3 (Seal Width):	25mm max.
S4 (Seal Width):	30mm max.

Center Press-Seal Pouch Bag Machine

Flat Pouches
W (Pouch Width):	35mm to 400mm
L (Pouch Length):	500mm max.
S1 (Bottom Seal Width):	5mm to 50mm
S2 (Center Seal Width):	8mm to 15mm
Gusset Pouches
W (Pouch Width):	55mm to 400mm - 2G
L (Pouch Length):	500mm max.
G （Gusset Fold Width):	10mm to 80mm
S1 (Bottom Seal Width):	5mm to 50mm
S2 (Center Seal Width):	8mm to 15mm
S3 (Gusset Seal Width):	5mm to 7mm

General:
Film:	Laminated films of all kinds.
Roll Size:	Max. Width: 820mm Max. Diameter: 600mm 3-inch paper core.
Roll Film Unwinding Unit:	Horizontal shaft, V-plate system, and definitive tension control system with power brake equipment.
Control System:	Numerical control system.
Film Feed Mechanism:	Walking motor drive system, computerized equipment settings, and print mark detection by color mark sensor.
Heatsealer Vertical Movement Mechanism:	Single AC asynchronous motor drive system.
Sealing Width:	Cross Seal Width: 60mm max. Longitudinal Sealing Width: 50mm max. Wide heat sealer required for sealing widths exceeding 50mm (80mm max.).
Function Data Setting:	Pouch making speed, etc.
Bag Making Capacity:	Three-Side-Seal Pouch Bag Machine: Max. Cycles: 130 CPM Max. Film Speed: 28m/min Center Press-Seal Pouch Bag Machine: Max. Cycles: 100 CPM Max. Film Speed: 24m/min Cycles and film speed are calculated separately and not related.
Power Required:	Walking Motor:	1 × 1.0kW + 1 × 1.5kW = 2.5kW
	Heat Sealer AC Asynchronous Motor:	1 × 3.0kW = 3.0kW
	Roll Film Unwinding Motor:	1 × 0.4kW = 0.4kW
	Longitudinal Heat Sealer:	5 × 2.0kW × 2 = 20kW
	Cross Heat Sealer:	3 × 2.0kW × 2 = 12kW
	Other:	3kW
	Total:	41kW
Area for Installation (mm):	2400 × 7880
Weight:	3500kg
Optional Equipment:	Standing pouch unit, various punch equipment, 2-stage racking unit, dual AC servo motor drive system, and temperature control system.
Bag making capacity depends on film material and thickness. Due to equipment improvement, the abovementioned figures and appearances may be changed without notice. The optional equipment mentioned above are sold separately and are not included as standard equipment. Options in addition to those mentioned above can be designed and manufactured to suit customer needs.

REQUEST A QUOTE